General purpose - Pessina Acciai

Since 1934 Metallurgica Pessina produces high quality steel strips for many applications. We raised wide experience facing to all application specific needs .

This experience is at our Customers disposal and our engineers will be pleased to evaluate and develop customer’s new project supporting them from prototypes to production’s lots.

Our steel strips guarantees uniformity both in mechanical properties and thickness tolerance, flatness and straightness.

Main applications

Wood Industry

Hand tools
Trowel
Spatulas
Creping blades
Coater blades
Blanking of flat part

Most common Grades

Following chart shows standard grades we have on stock. Other grades can be supplied upon request.

Steel Designation				Chemical Composition - Weight % (Casting Analysis)									Indicative Mechanical Properties - Quenched and Tempered (QT) State
Brand	Wr. N°	AISI - SAE	norm EN	C	Sl	Mn	P max	S max	Cr	Mo max	V max	Nl	HV	HRC	N/mm²

C 60S	1.1211	1060	10132-3	0.57 - 0.65	0.15 - 0.35	0.60 - 0.90	0.025	0.025	0.40 max	0,10		0.40 max	345- 530	35 - 51.5	1125 - 1775
C 67S	1.1231	1070	10132-4	0.65 - 0.73	0.15 - 0.35	0.60 - 0.90	0.025	0.025	0.40 max	0,10	-	0.40 max	370 - 580	38.5 - 54	1220 - 1920
C 75S	1.1248	1075	10132-4	0.70 - 0.80	0.15 - 0.35	0.60 - 0.90	0.025	0.025	0.40 max	0,10		0.40 max	370 - 580	38.5 - 54	1220 - 1920
C 100S	1.1274	1095	10132-4	0.95 - 1.05	0.15 - 0.35	0.30 - 0.60	0.025	0.025	0.40 max	0,10		0.40 max	370 - 630	38.5 - 57	1220 - 2145
75 Cr 1	1.2003		10132-4	0.70 - 0.80	0.25 - 0.50	0.60 - 0.80	0.025	0.025	0.30 - 0.40				365 - 600	38 - 55	1200 - 1950
51Cr V 2	1,8159	6150	10132-4	0.47 - 0.55	0.40 max	0.70 - 1.10	0.025	0.025	0.90 - 1.20	0,10	0,10 - 0.25	0.40 max	370 - 550	38.5 - 52.5	1220 - 1810
42Cr Mo 4	1.7225	4142	10132-3	0.38 - 0.45	0.40 max	0.60 - 0.90	0.035	0.035	0.90 - 1.20	0,15 -0,30			340 - 390	36 - 48	1135 - 1560
80 Cr V 2	1.2235		10132-4	0.75 - 0.85	0.15 - 0.35	0.30 - 0.50	0.025	0.025	0.40 - 0.60	0,10	0,15 - 0.25	0.40 max	370 - 550	38.5 - 52.5	1220 - 1810
75 Ni 8	1.5634		10132-4	0.72 - 0.78	0.15 - 0.35	0.30 - 0.50	0.025	0.025	<0,15	0,10		1.80 -2,10	370 - 550	38.5 - 52.5	1220 - 1810
102 Cr 6	1.2067	52100	10132-4	0.95 - 1.10	0.15 - 0.35	0.20 - 0.40	0.025	0.025	1.35 - 1.60	0,10		0.40 max	405 - 630	42 - 57	1320 - 2145
D 6 A				0.44 - 0.48	0.10 - 0.35	0.60 - 0.90	0.025	0.025	0.85 - 1.20	0.85 - 1.15	0.85 - 1.15	0.30 - 0.75	405 - 631	42 - 50	1320 - 1700
20 Mn B 5	1.5503		10083	0.17 - 0.23	0.40 max	1.10 - 1.40	0.035	00:04		B 0.008 - 0.0050			320 - 405	32 - 41	1030 - 1290

Dimension range
Width	15 - 410 mm
Thickness	0,20 - 3,50 mm

Runded, squared, squared chamfered edges
Width	15 - 315 mm
Thickness	0,50 - 3,50 mm

Surface Finishing
Grey - White - Blue furnace White - Yellow - Blue polished

	COIL DIMENSION
inner diameter	300 - 400 - 500 - 700 - 800 mm
Outer diameter	1400 mm max
coil weight max	4000 kg

CUT TO LENGTHS	150 - 6000 mm

CUT TO LENGTHS

150 - 6000 mm

General purpose Hardened and Tempered steel strips

Main applications

Most common Grades

Luigi Pessina Acciai

Contacts

Where we are